EPROMER5N.ZIP
FULL PACKAGE

3.8MBytes
Sep/10/2002

epromer5_1.zip
Complete Windows Installation Package - Download, Unzip and Run the SETUP file. It will install all the necessary files and DLLs at your computer.  We recommend you to install at the default directory;  C:\Program Files\Epromer.    
After the installation, we suggest you to download both update files below (epromer5x.exe and epromer6xx.exe. They are the maximum possible updated files.  Epromer5x.exe will replace the one in this "Full Package", while the epromer6xx.exe is a follow one software. You can keep both in the same directory, running one or another by your convenience.

EPROMER5N.EXE

260kBytes
Jan/10/2003 

epromer5n.exe - version 1.0.23
This is the last possible update for Epromer5 windows software, produced before the floading disaster in our company.  All other developments are being made into the Epromer6 version below.  This version contains Flash units routines, while in the Epromer6 it is being produced.
Download this file and replace the one installed by the installation program above.  You can create a short cut to your Desktop for convinience.

Version 1.0.20 now accepts binary file of 2MBytes for odd/even byte programming..
Program Speed Slider now when set below value of 10, will reduce 5 times the program speed from the normal values, for very speedy computers.  Speeds lower than 1GHs, use values 10 or above, above 1GHz use 9 or below.
Added new Flash unit am29F040 and N/HMOS Eprom 27128 (21Vpp).
Added new Flash unit EON EN29F040.
Added 2732A Eprom.
Added Atmel AT29C256 Flash 
Added 27256 NMOS/HMOS (21V) version
Xicor X29C256 Address A14 corrected. (1.0.22)

EPROMER6_1054.ZIP
FULL PACKAGE

3.6 MBytes
Oct/13/2003 

epromer6_1054.zip - version 1.0.54
This is the Full Installation package for Epromer6 software.
This BETA version, is the PHOENIX from the Epromer5 ashes. It supports Epromer4, Epromer5 and Epromer6 boards being already distributed.  This version identifies and adapts itself for any of those 3 boards.  There are hardware modifications from one board to another, the software needs to know it.

This version 1.0.54 supports Eeproms 24C08, 24C16 and 24C32
Flash units are not available in this version yet (Use Epromer5 version above)
Improved better programming algoritms for Eproms 2732 to 27C801 (4k to 1MegaByte). The new algoritm serves better eproms from many different manufacturers.  The new routines in this version runs much better than the old ones in the Epromer5N version above.  If you are running the Epromer and don't need flash capabilities (for a while), this is the best version to use.

Basic change from board Epromer5 to Epromer6 is the hardware to support 2716 eproms. If you already installed the Epromer5 Full package above, you don't need to run this Installation Package, just copy the bare executable file below to the same Epromer5 directory (epromer6ac.exe).   You can have both versions in the same directory, but don't run both versions at the same time - unexpected results can happens.

Epromer6 software version can drive either EPROMER4, EPROMER5 or EPROMER6 boards.

EPROMER6ac.exe

320 kBytes
Oct/13/2003 

epromer6ac.exe - version 1.0.54
This is the Executable file for the package above.  It is in the same version of the installation package above (epromer6_1054.zip), so you don't need to copy this to the installation directory.

BIf you have the Epromer5 package installed and wish to have the Epromer6 version, just copy this file into the same Epromer5 directory.  All the other files from Epromer5 will serve well this Epromer6.  In case of not working, download and install the full epromer6 package above.
 
Epromer6 software version can drive either EPROMER4, EPROMER5 or EPROMER6 boards.

By some reason that even Microsoft can not explains, their own VB6 Suite generated Installation Package sometimes crashes or loops during files installation, most of the cases on Windows ME version.   If this is your case, interrupt the installation process and try to run the Epromer5 or Epromer6 program directly from the installation directory. If something is missing you can download it from below on this page.  If the software complains about a missing DLL or OCX, you can find it below, just download, unzip if zipped, move to your C:\Windows or C:\Windows\System or C:\Windows\System32 directory as stated.  
In terms, you don't even need to download the Full-Install package, you can create a new directory, example; C:\EPROMER5 and copy the EPROMER5N.EXE into, also download the IO.DLL to your C:\WINDOWS directory.  Then run the Epromer5N and see what else it is complaining, download and install it from this yellow area.  Some Windows already have the DLLs or OCX installed, some don't. It is impossible to know your actual status.   The new Epromer6_1054 package seems to not presenting this problem - It was generated under VB6 Suite updated to Service Pack 5, what seems to have this problem fixed.

Some OCX or DLL require you to update Windows Registry, to do so, just go to Start, Run and type;   
REGSVR32  FILE.OCX  or  REGSVR32  FILE.DLL  whatever the case, where "FILE" is the filename, of course.

If you still with problems with Epromer5 or Epromer6, do a problem determination here:  http://www.ustr.net/epromer5/pd.htm

IO.DLL

49kBytes
Oct/16/2002

IO.DLL
Some Windows2000, WindowsNE and WindowsXP machines does not run well the Epromer5 installation files, and it end up without this IO.DLL at the WINDOWS directory.  If when running the EPROMER5N program it complains missing this file, please download it and copy to the C:\WINDOWS directory and try the program again.
This file IS INCLUDED in the Full Installation Packages above, but it may be missing into your Windows Directories upon a bad installation process.

MSCOMCTL

498kBytes
Nov/03/2002

MSCOMCTL.OCX
Download, Unzip the File, copy to your C:\WINDOWS\SYSTEM directory, then go to START-RUN and type;  REGSVR32 MSCOMCTL.OCX.
This file IS INCLUDED in the Full Installation Packages above, but it may be missing into your Windows Directories upon a bad installation process.

MSVBVM60

714kBytes
Nov/03/2002

MSVBVM60.DLL
Download, Unzip the File, copy to your C:\WINDOWS\  or C:\Windows\System directory
This file IS INCLUDED in the Full Installation Packages above, but it may be missing into your Windows Directories upon a bad installation process.

COMDLG32

145kBytes
Nov/03/2002

COMDLG32.DLL and COMDLG32.OCX
Download, Unzip the File, copy the files to your C:\WINDOWS\  or C:\Windows\System directory
These files ARE INCLUDED in the Full Installation Packages above, but it may be missing into your Windows Directories upon a bad installation process.

User's Manual

1.2MBytes
Sep/30/2002

EPROMER5.PDF
This is the Epromer(5/6) Preliminary User's Manual.  It contains all the operation instructions, tips, tricks, technical information about this product and some problem determination sequence, it can help you locate any possible problem you may have.  This preliminary version may have possible lots of translation errors. Others should replace this one in 2 weeks.  For further problem determination issues, please visit http://www.ustr.net/epromer5/pd.htm

Last Revision: Oct/13/2003
Steve Banners - steve@ustr.net